Shenzhen Future Technology Co., Ltd
Pay for the goals and be responsible for the results!!!
Add to Cart
Weld Laser Fume Extractor Small Size Adjustable Gear Dust Collector Portable
Features:
1.Multi layer filtration, rapid purification, filter failure sound and light alarm.
2.Low cost basis: as low as 1.85 yuan / day (8 hours / day)
3. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)
4. High negative pressure, high flow, small volume, light weight, easy installation, flexible filter replacement.
5. Independent research and development of hall less brushless DC motor, high efficiency, long life, zero consumables and zero maintenance, support continuous 24-hour use.
6.8 years super long warranty for main engine, lifelong after-sales service for customers.
Instructions:
| Power(W) | 80 |
| Dimension(mm) | 420*245*400 |
| Air Flow(m3/h) | 235 |
| Noise(db) | <52 |
| Voltage | 110/220 |
| No-load speed(r/min) | 2000 |
| Wind spped(m/s) | 17 |
| Weight(kg) | 12 |
| Negative pressure(pa) | 2000 |
Advantages:
1,Multiple filtration ensures complete purification of harmful smoke and dust
2.Brushless DC moter,stable long service life
3.Noise canceling design,quieter working place
FAQ
Q:How long is the tube standard configuration?
A:The 75mm bamboo joint pipe is standard for 1.4m, and the 55mm bamboo joint pipe is standard for 1.2m. (Soft pipe and high temperature pipe are configured according to customer needs, but the shorter the better).
Q:Can smoking pipes be shortened or lengthened at will?
A:It can be shortened or lengthened appropriately; But too long fixation is relatively poor, because there is no support point, easy to sag, it is recommended that the length of bamboo pipe should not exceed 1.5 meters, high temperature resistant pipe and hose should not exceed 2M. (depending on model)
Q:What are the diameter specifications of smoking pipe?
A:Smoking pipe diameter of 50 mm, 65 mm, 75 mm, 90 mm, 100 mm, 120,160,200,300 is usually a PVC material. It can also be customized according to the diameter of the on-site pipeline.
Q:What is the smoking hood made of? Can it withstand high temperature? What are their characteristics?
A:Smoking cover silica gel, acrylic, aluminum alloy a total of three materials; The flexibility of silica gel material can withstand the temperature of about 400 degrees, and the cigarette butts are not bad. And acrylic material light transmittance is good, but not high temperature resistance; Aluminum alloy is light, beautiful, high temperature resistant, high price.
Q:Does the size of the pipe affect the effectiveness of smoking?
A:Yes, and the impact is very large, because the increase of the bend resistance will be stronger, resulting in the weakening of suction, should be as far as possible to reduce the bending of the pipeline.
Product part picture:
