Shenzhen Future Technology Co., Ltd
Pay for the goals and be responsible for the results!!!
Add to Cart
Hand Welding Heat Gun Handling Fume Purifier Double Portable Movable Suction Arms Low Power Consumption
Features:
1.Multi layer filtration, rapid purification, filter failure sound and light alarm.
2.Low cost basis: as low as 1.85 yuan / day (8 hours / day)
3. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)
4.Special alloy impeller, anti-corrosion, stable operation
5.All three filters can be replaced separately
Instructions:
| Power(W) | 200 |
| Dimension(mm) | 420*245*400 |
| Air Flow(m3/h) | 150*2 |
| Noise(db) | <55 |
| Voltage | 110/220 |
| No-load speed(r/min) | 4500 |
| Wind spped(m/s) | 11.5*2 |
| Weight(kg) | 13 |
| Negative pressure(pa) | 2200 |
Advantages:
1.Independent research and development of hall less brushless DC motor, high efficiency, long life, zero consumables and zero maintenance, support continuous 24-hour use.
2.Removabel hook and cover,replace the filter and check the condition easyier
3.Compact design machine with 4 universal wheel under,easy to move and storage
4. High negative pressure, high flow, small volume, light weight, easy installation, flexible filter replacement.
5. Durable mental frame structure,firm and unshaped
FAQ
Q:Can it be used in high temperature environment?
A:The high temperature should be divided into instantaneous high temperature and long-term high temperature, the temperature within 60 degrees can be used; the temperature over 60 degrees for a long time is not recommended, because it may lead to fire.
Q:When the filter element needs to be replaced, will it give an alarm?
A:The indicator light of digital display control panel will flash red light and give out alarm sound.
Q:Can the pipe of smoke and dust move back and forth with the laser head?
A:In principle, it can, but it can't if auxiliary gas is needed
Q:Can water cutting match your purifier?
A:No, because the humidity of the gas and dust inhaled by the air inlet is 40% - 80%, too high humidity will cause the filter element to fail quickly and the circuit inside the machine to be damaged.
Q:Can the filter element / collection bag / drum be washed?
A:No, because most particles are insoluble in water
Product part picture:
